SHRDC has successfully completed the trainer status (CIT) for IPC 7711/21 with IPC Master Trainer Mr. Leo Yang giving an excellent 5 days training at Shah Alam premises.  A special soldering lab was setup exclusively to cater for the high standards and rigorous demand for hands-on in Rework, Modification and Repair syllabus. Amongst the attendee are representatives from Vanguard (MY), Continental Corporation(PH) and ROHDE & SCHWARZ (MY).   

Again, our heartiest congratulations to all successful certified CIT. Our next Soldering Lab related class will be IPC JSTD 001, if you are interested, kindly call SHRDC for more information.

Calling All Printed Circuit Board PCB, Electronic Hardware Designer, NPI, Layout Engineer…

Don’t miss this opportunity to obtain an international recognized PCB Designer CID certification!
IPC Certified Interconnect Designer CID Workshop and Exam.

BENEFITS:
- Fully HRDF claimable under PERLA scheme (direct deduct from HRDF funds, no need for cash/cheque payment)
- Testimonial of PCB designer’s knowledge and skills in IPC standards for Printed Board
- Credentials for your promotion into next role, expertise and commitment to Excellence
- Minimal criteria or 1st level assurance for employment into a company
- Obtain the pre-requisite for IPC CID+ (Advanced Certification)

LOCATION:
PENANG 18-20 AUGUST 2010

TRAINER:
Fully IPC Certified CID Trainer

See attachment for details and success classes conducted.

IPC 610D and 7711/21 - Register now for this extremely valuable Certified IPC Trainer (CIT) Certification !

Synopsis:
Classes are conducted by MIT Master IPC Trainer - Mr. Leo Yang
17-21 May CIT IPC-7711/21 Rework, Modification and Repair
24-27 May CIT IPC-A-610D Training and Certification / Re-certification

A CIT has benefits of being certified to train all CIS in their respective certified subject in their companies. All certifications are conferred by IPC USA.

BENEFITS for the company:
Companies with niche application such load boards (ATE), or any PCB (Lifts control PCBs, Back Plane system cards), are usually subjected to very expensive faulty PCB boards replacement. In many circumstances, these PCB Boards cost over RM 10,000 or even RM 50,000. A cost-saving solution will be to repair them onsite in the company. However, these repairs are not just normal “through-hole” soldering nor general repairs. Some of these boards are SMT type, with small footprints and demand re-soldered or repaired PCB quality must conformed to IPC standards. These are especially critical to Aerospace, Military and Space industries. Repairs are required to have skills and workmanship.

Upon completion of CIT course, the Trainer will be certified to conducted CIS (Specialists) class for the company and have companies’ key repair centre staff or operators skilled and trained for this important task. This will ensure that the company will have a continuous training program for all incoming new staff or existing staff without extra costs.

Sign-up with us soon for this exciting course at SHRDC.

Technical Contact:   csoolan@shrdc.org.my

Click below for:

• Attached PDF Course Info


• Attached PDF Course Registration

Microsoft Excel is a spreadsheet application used to perform calculations, statistical analysis and other related operations through the powerful tools that built in the software itself. This course will help you to create professional charts, functions and formulas for the project assigned.

THE PROGRAM AIMS TO

• Create formulas that include absolute references and named ranges
  
• Sort data by single or multiple columns
  
• Filter data by single or multiple criteria
  
• TIPs and TRICKS that is not to be missed out

WHO SHOULD ATTEND?
This course is designed for those who are interested to further explore in Microsoft Excel.

COURSE OUTLINE Day 1 Module 1: Manipulating Data & Named Ranges Module 2: Templates Module 3: Formatting and Display Techniques Module 4: Sorting and Querying Data Day 2 Module 5: Linking and Consolidating Data Module 6: Charts Formatting Techniques Module 7: Protection and Security

DURATION
2 Days

METHODOLOGY
Theory, Hand-on exercises

CONTACT
v.nalini@shrdc.org.my

Industrial Skills Enhancement Program (INSEP) :

1) Trainee R&D Engineer - Advanced Semiconductor Chip Packaging. Click HERE for more details

2) Trainee R&D Engineer - Analog IC Design. Click HERE for more details

INTERNATIONAL TECHNOLOGY AND EFFICIENCY WORKSHOP FOR INJECTION MOULDERS by Andy Routsis, currently President of A. Routsis Associates, Inc. in USA.

Date:   26 - 27 April 2010
Duration:  Two days
Venue:   Auditiorium, 2nd Floor, Selangor Human Resource Development Centre (SHRDC)

For more details of the technical talk and its registration form, please click here [273kB, PDF File]

Analog Custom IC Design INSEP SCD08 completion

Shah Alam, March 12 2010:

It was indeed a joyous moment for all SCD08 students who made it through this grueling course after 9 months of full-time study at SHRDC. For the past months, these students have undergone an intensive training that included post-graduate modules from Swinburne University (SUT). These modules serve as invaluable credentials for postgraduate studies exemption under a special program with SUT Masters of Engineering (Microelectronics). These modules include; Semiconductor Physics (Solid State Devices), Technology Management, Reliability and Testing.

The students have successfully obtained OJTs and job placement in various companies in Penang, Kulim and Klang Valley. We like to congratulate students who had stayed on course for the last months, with aspirations, vision, focus and determination to become an Analog Custom IC Designer. They will truly reap the rewards after graduation, for the hard work, time and effort to remain in this highly niche engineering field. It’s not the end of the learner’s journey, but the beginning of a real-world experience and fulfilling the Analog IC Designer’s responsibilities ahead.

Kudos! to all who have finally made it through the last leg of this marathon, and from here onwards, all the best for the future.

Below: The best ADC Layout is awarded based on fulfilling the merits of a quality custom analog IC layout design as specified by Japan’s leading IC Mask company Toppan’s curriculum.

Best ADC Layout Design Award - Md Fendy B Md Fazeli & Class SCD08

SHRDC Graduation Ceremony 2010 Photo Link.

Click here to view the photo gallery. Kindly select "Graduating Ceremony 2010" from the list.

Dear Valued Customer,

Greetings from SHRDC !! Once again we are having IPC-A-610D training here in SHRDC. The training dates is as mentioned in our e-brochure. Do look through and please contact me personally to register yourself.

This is a 3-days class for employees who are required to be certified for IPC-A-610D. The class is deisgned to fulfill IPC-A-610D standard which comply with Classes I, II and III. For numerous organizations, IPC-A-610D certification is required for anyone who hols a solder certification, who is an inspector, or who examines products and makes accept/reject decisions. This requirement includes all assemblers, quality personnel, manufacturing & process engineers, and some test technicians & test engineers, as well as design engineers.

The acceptability requirements of electronic assembilies presented in the IPC-A-610D standard will be studied in complete detail, including the comprehensive acceptance/reject criteria for handling of electronic assemblies, mechanical assembly, component installation, location, orientation, soldering, cleanliness of assemblies, marking of assemblies, coatings, discrete wiring assembly, and surface mount assemblies, etc.

Our next public class is scheduled as below

Date         :    23rd - 25th March 2010
Venue      :    Selangor Human Resource Development Centre (SHRDC), Shah Alam, MALAYSIA
Price          :    RM2430/pax


For further detail, please contact V. Nalini - email: v.nalini@shrdc.org.my

Click HERE to view new Call For Paper

For more details about our March circular, please click here (pdf file: 513 kB)

Recent CID class in Penang..

The CID Certified Interconnect Designer Workshop and Exam on 18-20 Jan 2010 was successfully completed in EASTIN Hotel. A heartiest congratulations to all participants who have passed and are now certified by IPC PCB Designer Council. Due to numerous enquiries, a second class will be schedule in end Jun/July period 2010. Kindly register online at SHRDC.

Selangor, Malaysia 7 Jan 2010 - Leading international and local electronic industry leaders will gather in Malaysia as the country hosts the “2nd  Asia Symposium on Quality Electronic Design” (ASQED) in Penang, 3-4 August 2010.

This symposium will be co-organized by Malaysian Industry-Government Group for High Technology (MIGHT), Malaysian Institute of Microsystems (MIMs) and The International Society for Quality Electronic Design (ISQED.org) with support from Malaysian Industrial Development Authority (MIDA). This symposium also gathers leading industrial and educational entity such as Intel Microelectronics (M) Sdn. Bhd), STAT ChipPAC Malaysia Sdn Bhd and Swinburne University of Technology as committee members.

ASQED’10 spans two days, in four parallel tracks, hosting near 100 technical presentations, several keynote speakers, tutorials and other informal meetings.  Conference Proceedings will be published by IEEE and posted in the IEEE digital library.

As a premier Asia Symposium, ASQED’10 accepts and promotes papers related to circuit and system design (digital, analog, RF, and mixed-signal), semiconductor manufacturing, advanced IC Packaging, Test, Electronic Design Automation (EDA), as well as emerging semiconductor nano/bio-technologies, and photovoltaic electronics. Topics of interest for paper submission are as follows:

•  Circuit & System Design
•  Test & Verification
•  IC Packaging Technology
•  PCB and PWB Technology & Manufacturing
•  Semiconductor Technology & Manufacturing
•  Nano and Bio Electronics Innovations
•  Photovoltaic Technology & Manufacturing
•  Electronic Design Automation Methodologies
•  Mechanical Electro Machine System (MEMS)

  Additional information on the 2^nd ASQED 2010 can be found at http://www.isqed-asia.org/

Group Picture of ASQED’10 Conference Organizing Committee

From left (back  row): Nik Mohd Faizal, Masliza, Cheah Soo Lan, Fakhruz Zaman, Robert Tai
From left (front row):   SK Fong, Dr. Norlela Ariffin, Mohd Yusof, Nik Ahmad Faizul,  JA Lew,  Tham Wai Keong

ABOUT THE ORGANIZATIONS
MALAYSIAN INDUSTRY-GOVERNMENT GROUP FOR HIGH TECHNOLOGY (MIGHT) was launched as an independent and non-profit organization that is driven by a membership drawn from both the public and private sectors. MIGHT predominant role is to enable consensus building and coordination for Industry-Government partnership in high technology. It provides strategic technology inputs for Industry and Government, nurtures technology-based enterprises and entrepreneurship as well as prepares knowledge workers relevant to strategic and high technology industry needs. As an organization under the purview of the Ministry of Science, Technology and Innovation (MOSTI), MIGHT represents the Ministry in interfacing with the Industry to promote technology uptake in business.

Malaysian Institute of Microsystems (MIMs)
Recognizing the information age as an era of great opportunity, the Malaysian Government had the foresight to develop the country’s manufacturing and technology capabilities to meet the future trend. Recognizing the need to move upstream and climb the value chain into design, development and innovation, MIMs was established. MIMs is committed to provide hands on industrial training and apprenticeship programmes, backed by a facility that is equipped with the latest state of the art EDA tools, test and prototyping facilities.

THE INTERNATIONAL SOCIETY FOR QUALITY ELECTRONIC DESIGN (ISQED.org) established in 1999, is a professional organization devoted to highlight, promote, and accelerate establishment of industry-wide targets for the "Quality" of the integrated circuit designs, and helping to develop metrics & standards for quality electronic design front to back. The mission of ISQED is to provide forums to present & exchange ideas and to promote research, development, and application of Design Methods, Design Processes, Semiconductor technologies, IC packaging, Test, EDA Design Tools, and Methodologies, employed for Design of Integrated Circuits, with focus on design for quality, manufacturing, yield, and reliability. ISQED.org emphasizes a holistic approach toward electronic design and intends to highlight and accelerate cooperation among the IC Design, EDA, Semiconductor Process Technology, IC Packaging, Test, and Manufacturing communities. The International Symposium on Quality Electronic Design (ISQED) is the flagship conference of ISQED.org and has been held successfully for 10 years in California, USA.

THE MALAYSIAN INDUSTRIAL DEVELOPMENT AUTHORITY (MIDA) is the first point of contact for investors who intend to set up projects in the manufacturing and services sectors in Malaysia. With its headquarters in Malaysia's capital city of Kuala Lumpur, MIDA has established a global network of 19 overseas offices covering North America, Europe and the Asia Pacific to assist investors interested in establishing manufacturing projects and services

For more details about the ASQED 2010 Call for Papers, please click here (pdf file: 422 kB)

Course name: Leading Bold Change
                         * SHRDC is the Exclusive Training Partner for Leading Bold Change™ in Malaysia.
Course date:   26-27 January 2010

Kindly download these brochures for more detail:

• Leading Bold Change™ Workshop [PDF file]


• LBC January 2010's Trainer List [PDF file]

To enquire for more information, simply write to info@shrdc.org.my or Call us at 03-55133560